Practical, on-ground garment inspection support to help you understand product quality and make informed sourcing decisions.
On-Site Garment Quality Inspection (Pre-Shipment)
Pre-shipment garment inspections are conducted directly at the factory to ensure every shipment meets quality standards. The inspection focuses on all critical quality aspects, including workmanship, labeling, performance, packaging, and regulatory compliance. Below are examples of on-site tests performed during a garment inspection:
Key On-Site Quality Checks
Care Label Verification
- Confirm care label content and symbols for at least 1 piece per size and per style
- Ensure all information matches client requirements and fabric composition
Needle Damage Inspection
- Manually pull and stress all seams to check for needle holes caused by sewing
- Special attention to waistband, leg hems, pockets, front/back rise
- If needle damage is detected, expand sampling and record defect quantities with photos
Garment Folding & Measurements
- Verify garment folding method
- Confirm finished folded dimensions match specifications
Washing Test
- Conduct a simple wash test with soap to check for colorfastness and ensure no color fading Metal Detection Test
- Perform metal detection to ensure no foreign metallic objects remain in the garment
Zipper / Fastener Test
- Test zippers, rivets, Velcro, and snaps for strength and durability
- Ensure zippers lock properly and do not open from the middle
- Check bartack reinforcements under stress (20 pcs sample)
Symmetry Check
- Confirm symmetry of left/right legs, sleeves, pockets, and design elements
- Inspect for garment twisting and measure any detected differences
Fiber Content Verification
- Check percentage statements for each fiber type in the garment to ensure accuracy
Hanger Inspection
- Check percentage statements for each fiber type in the garment to ensure accuracy
Hanger Inspection
- Verify hangers match approved samples and are free from damage or deformation
Sweater Net Weight Check
- Weigh sweater garments (in lbs per dozen)
- Inspect 3 pieces per size
Fitting Test
- Fit garments on a mannequin or suitable model
- Take photos from front, back, and side to confirm proper fit and alignment with client expectations
- Ensure that linings do not extend beyond the shell fabric when worn
Fabric Condition Check
- Hand-feel inspection to detect excess humidity in the fabric
Odor Test
- Check for any abnormal or unpleasant odors in the fabric or finished garment